immediately. If ink does come in contact with skin, wipe off with a clean, dry, absorbent cloth (do not use solvent or thinner). Wash and rinse affected area with soap and water. Consult the SO Material Safety Data Sheet for further instructions and warnings. Storage Store tightly covered at temperatures between 15°C - 32°C. Ink taken from ... STARDUST FLUID ABSORBANT. Recommended for use to absorb blood, urine, vomit, runoff water, mop waters, water-based paints, inks and dyes, compressor condensates, machine coolants, any waste-water deposits, rinsates and detergents. Material Safety Data Sheets. ... What would happen to the emulsion if you left the lid off for a long period of time? ... Print with a smaller squeegee that does not ...

squeegee and roll it afterwards. Mix the SikaScreed® HardTop-60 in a paddle mixer and apply on the SikaScreed®-20 EBB / Sikadur®-32 bond-ing bridge ‘wet on wet’ and screed off to level with battens. To obtain optimum surface strength, finish the SikaScreed® HardTop-60 with suitable trowels or floats. Please refer to the material safety data sheet (SDS) for more detailed information ... Flush with water and squeegee off residue before it dries. Re-apply CHEM HARD ...